CPE-135A
CPE-135A
I-Chlorinated polyethylene yi-saturated polymer material, inkangeleko ingumgubo omhlophe, ayinayo ityhefu kwaye ayinancasa, inokumelana nemozulu ebalaseleyo, ukuxhathisa kwe-ozone, ukuxhathisa imichiza kunye nokumelana nokwaluphala, kwaye inokumelana ne-oyile elungileyo, ukubuyiswa komlilo kunye nokusebenza kombala. Ukuqina okuhle (kusaguquguquka kwi -30C), ukuhambelana kakuhle nezinye izinto zepolymer, kunye nobushushu obuphezulu bokubola.
I-CPE-135A iqulethe phantse i-crystals kwaye ine-flame retardancy egqwesileyo, ukugquma kombane, ukuxhathisa iikhemikhali, ukuxhathisa ioli kunye nokuxhathisa amanzi; Inokuhambelana kakuhle nePVC, Cr, NBR, njl njl. Isenokusetyenziswa njengento yokunqanda ilangatye kwiimveliso ze-ABS, ucingo kunye neendawo ezivaliweyo zombane, izinto eziguquguqukayo zePVC zogwebu, izilungisi zerabha zokwenziwa ezikhethekileyo, iirubha zokwenziwa ngokubanzi, kunye neeplastiki zePVC. kunye nezinye iiplastiki. Xa kuthelekiswa ne-polyethylene eqhelekileyo kwimarike, i-Bontecn chlorine polyethylene ineempawu zobushushu obuphantsi beglasi, ukusebenza okuphezulu kunye nobude obuphezulu ngexesha lekhefu. Luhlobo oluphezulu, oluphezulu lwerabha ekhethekileyo. Ingasetyenziswa yodwa okanye idibene ne-ethylene-propylene rubber, i-butadiene-propylene irabha kunye ne-chlorostyrene irabha ukuvelisa iimveliso zerabha. Iimveliso eziveliswayo zinobomi obude benkonzo kwaye ziyakwazi ukumelana ne-UV. Kungakhathaliseki ukuba imo engqongileyo kunye nemozulu inzima kangakanani, banokugcina iimpawu ze-rubber zendalo ixesha elide.
| ipharamitha | iyunithi | Umgangatho wovavanyo | CPE-135A |
| Imbonakalo | —- | Ukuhlolwa okubonakalayo | Umgubo omhlophe |
| Umxholo we-chlorine | % | —- | 35±2 |
| ukuxinana komphezulu | g/cm³ | GB/T 1636-2008 | 0.50±0.10 |
| Intsalela yeSieve (0.9mm mesh) | % | RK/PG-05-001 | ≤0.2 |
| Iyaguquguquka | % | RK/PG-05-003 | ≤0.4 |
| Okushiyekileyo (750℃) | % | GB/T 9345-2008 | ≤5.0 |
| tensile strength | MPa | GB/T 528-2009 | 8-13 |
| Ukwandisa ngexesha lekhefu | % | GB/T 528-2009 | ＞800 |
| Unxweme olunzima A | —- | GB/T 531-2008 | ≤65 |
1. Ubude obugqwesileyo ngexesha lekhefu kunye nolwelo olugqwesileyo lomgubo;
2. Nika iimveliso zePVC ukuqina okulungileyo;
3, Ukuqina okugqwesileyo kunye namandla okuqina;
I-CPE135A inolawulo olubalaseleyo lomlilo kunye nokumelana nempembelelo, inokunyusa ukuqina kunye namandla empembelelo ye-PVC, kwaye inokusetyenziswa ngokubanzi kwiimveliso eziqinileyo ze-PVC ezifana neeprofayili ze-PVC, imibhobho kunye nokufakelwa, iipleyiti, iingcingo, njl.
